Canon Camera Lens 5178B002 User Manual

Nomenclature  
Distance scale  
Distance index  
Focusing ring  
Focus mode switch  
Image Stabilizer switch  
Lens mount index  
Contacts  
 
②  
③  
④  
⑤  
⑥  
⑦  
EF Lenses  
Instructions  
EF35mm f/2 IS USM  
Thank you for purchasing a Canon product.  
EF35mm f/2 IS USM is a wide-angle single focus lens that provide high  
image quality.  
1. Mounting and Detaching the Lens  
See your camera’s instructions for details on mounting and  
detaching the lens.  
❶  
“IS” stands for Image Stabilizer.  
After detaching the lens, place the lens with the rear end up to  
prevent the lens surface and contacts from getting scratched.  
If the contacts get soiled, scratched, or have fingerprints on  
them, corrosion or faulty connections can result. The camera  
and lens may not operate properly.  
“USM” stands for Ultrasonic Motor.  
Safety Precautions  
Do not look at the sun or a bright light source through the lens  
or camera. Doing so could result in loss of vision.  
ER  
F
If the contacts get oiled or have fingerprints on them, clean  
them with a soft clh.  
Looking at the sun directly through the lens is especially hazardous.  
Whether it is attached to the camera or not, do not leave the  
lens under the sun without the lens cap attached. This is to  
prevent the lens from concentrating the sun’s rays, which could cause  
a fire.  
If you remhe les, cover it with the dust cap. To attach it  
propalithe lens mount index and the  
index of the dust  
capurn clockwise  
. To remove it, reverse the order.  
❶  
2. Seting the Focus Mode  
Handling Cautions  
To shoot in autofocus (AF) mode, set the focus mode switch to AF  
.
If the lens is taken from a cold environment into a warm one,  
condensation may develop on the lens surface and internal  
parts. To prevent condensation in this case, first put the lens into an  
airtight plastic bag before taking it from a cold to warm environment.  
Then take out the lens after it has warmed gradually. Do the same  
when taking the lens from a warm environment into a cold one.  
To shoot in manual focus (MF) mode, set the focus mode switch to MF,  
and focus by turning the focusing ring. The focusing ring always works,  
regardless of the focus mode  
.
After autofocusing in ONE SHOT AF mode, focus manually by  
pressing the shutter button halfway and turning the focusing ring.  
(Full-time manual focus)  
Do not leave the lens in excessive heat such as in a car in direct  
sunlight. High temperatures can cause the lens to malfunction.  
3. Infinity Compensation Mark  
Conventions used in this instruction  
To compensate for shifting of the infinity focus point that results from  
changes in temperature.  
Warning to prevent lens or camera malfunction or damage.  
Supplementary notes on using the lens and taking pictures.  
The infinity position at normal temperature is the point at which the  
vertical line of the distance scale L mark is aligned with the distance  
Infinity compensation mark  
index  
❹ .  
For accurate manual focusing of subjects at infinity, look through  
the viewfinder or look at the magnified image* on the LCD screen  
while rotating the focusing ring.  
ft  
m
2.3 6.5  
0.7  
2
22 11 11 22  
* For cameras with Live View shooting capability.  
Distance index  
 

Belkin Network Router N600 User Manual
Belkin TV Video Accessories F5U109 User Manual
Blackberry Bluetooth Headset HS 250 User Manual
Blackberry Cell Phone sqn100 3 User Manual
Black Decker Trimmer LST300 User Manual
Breville Juicer JE3 User Manual
BRK electronic Smoke Alarm FCD2N User Manual
Casio PDAs Smartphones EM 500 User Manual
Celestron Binoculars C5 S User Manual
Chromalox Electric Heater PG412 10 User Manual